Ozark2KV6

ERA V6 / Timing field manual

RHYTHM TIME follows your manual release

Your hand chooses when to release. RHYTHM TIME controls the transition that follows.

RHYTHM TIME is the shared release-transition setting for manual Tempo Lock and RS Tempo in the reviewed V6 reference. It ranges from 0–300 ms, with 75 ms as the source default. It does not choose how long your hand holds the button or stick.

Two manual inputs share this transition field

PathYou controlRHYTHM TIME controls
Manual Tempo LockHolding Square / X, then releasing itThe following right-stick transition
Manual RS TempoThe physical right-stick input and releaseThe following transition for that manual path
OneTapThe assigned stick-click starts the saved sequenceUse INSTA TEMPO instead

The manual paths keep your release decision involved. Changing RHYTHM TIME does not turn them into an automatically held OneTap shot. Use the manual tempo guide for the complete input description.

Confirm Button Lock is not taking the button path

For manual button Tempo Lock, enable TEMPO LOCK and keep BUTTON LOCK off. In this V6 reference, Button Lock takes priority for the physical Square / X input when it is enabled. Seeing TEMPO LOCK on is therefore not enough to prove that your button press is following the manual path.

With Button Lock on, inspect Button Shooting’s SET TIME, MOVE TIME or FADE TIME in the selected environment instead. The mode checker helps identify this simplified idle input case; the setting index keeps the exact priority note beside BUTTON LOCK.

When release is Early or Late, isolate your cue first

On a manual path, your hand chooses when to release. If comparable shots repeatedly show Early or Late release feedback, keep RHYTHM TIME fixed while comparing the physical release cue. Moving a transition value does not select a different instant for your hand to let go.

Once release observations are consistent, inspect the separate tempo feedback. Fast and Slow concern the following rhythm transition. The hold-versus-tempo reference explains why those observations belong in different columns.

Compare one transition change at a time

For a transition comparison, keep the input method, jumper, game conditions and Human settings fixed. A small change within 0–300 ms can then be compared with another set of attempts. The worksheet’s Fast/Slow guidance is to compare a longer transition for repeated Fast observations and a shorter one for repeated Slow observations.

A worked change from 75 to 80 ms alters the following transition by five milliseconds. It does not add a five-millisecond automatic hold before your release. Keep a note of the previous value so you can return to the recorded setup.

Keep the shared field in mind when switching modes

Manual Tempo Lock and RS Tempo share RHYTHM TIME in the reference. If you change the value while testing one manual mode, do not assume the other manual mode has retained a separate previous number.

This timing also stays global across ENVIRONMENT. The MyCOURT, Park / City, REC and Crew HQ timing banks belong to Button Shooting. Keep those three distinctions together: manual versus automatic release, hold versus transition, and global fields versus environment-specific button banks.

Version and sources

Reference: official ERA V6 release notes, the 37-setting V6 index, and the official shooting demonstrations. Ranges and defaults describe the reviewed Base V6 reference; check the field names in your installed build. Worked examples illustrate which control changes; they are not a recommended jumper preset.